Inventory Unit Detail

STIHL TS 700 STIHL Cutquik®

$1,799.00

$1,799.00

Key Features

New/Used New
Usage0 Hours
Availability In Stock
LocationAll-Power Equipment
Condition Excellent

Product Features

Description

This cut-off machine is designed from top to bottom for extended service cutting.



The 14" STIHL TS 700 cut-off machine is the powerhouse of the STIHL line. Designed for superior handling during the toughest jobs, this machine features a powerful, high-speed engine, large fuel capacity, five-point dual element vibration control system built right into the handle, and a semi-automatic belt tensioner with an innovative ribbed belt. Its X2 filtration system is low maintenance and cleans airflow with nearly 100 percent efficiency, reducing downtime for filter maintenance. Each component on this machine was meticulously engineered with demanding professionals in mind.





NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.

Model Features
  • Reduced-Emission Engine Technology - Caring for Nature: The STIHL Inc. “Caring for Nature" seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions" as being cleaner than EPA and/or CARB exhaust emission standards.
  • Decompression Valve: The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
  • IntelliCarb™ Compensating Carburetor: The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine's correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty" side of the air box.
  • X2 Air Filtration System: The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
  • Bayonet-Style Fuel Cap: Includes retainer for easy use, even with gloves on.
  • Semi-Automatic Belt Tensioning: With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
  • Anti-Vibration System: STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
  • STIHL ElastoStart™: The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
  • Ergonomic Grip: The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Specifications
  • Displacement: 98.5 cc (6.0 cu. in.)
  • Engine Power: 5.0 kW (6.7 bhp)
  • Weight*: 11.6 kg (25.6 lb.)
  • Fuel Tank Capacity: 1200 cc (40.6 oz.)
  • Engine Speed: 9,300 rpm (Elec. Gov.)
  • Maximum Spindle Speed: 5,350 rpm
  • Arbor Size: 20 mm
  • Maximum Wheel Size: 350 mm (14")
  • Maximum Cutting Depth: 125 mm (4.9")
  • Power Source: Gas
NOTES:
*Dry weight includes water attachment and guard. Shown with optional STIHL diamond wheel.

Engine

Engine Size 6.0 cu. in. (98.5 cc)
Horsepower 6.7 bhp (5.0 kW)
Fuel Capacity 40.6 oz. (1200 cc)

General

Weight 25.6 lb. (11.6 kg)
Blade Size 14 in. (350 mm)

Shopping Tools